BC8640E

An easy to use polyurethane elastomer that is suitable for many applications. Special product characteristics include: room temperature mixing and curing, excellent hydrolytic stability, produces durable products that are easily produced, does not contain MOCA, MDA, or MDI. Uses include: molds for plaster and concrete, molds for epoxy, polyurethane and polyester castings or laminates, fabricating parts such as protective shipping pads, or skins for creatures. Hardness Shore A 35-40.

BC8660E

A multi-purpose elastomer that can perform many functions. Special product characteristics are: excellent use for molds for casting of concrete and plaster, resists moisture absorption, does not contain MOCA, MDA, TDI or MDI, very easy to use, cures at room temperature. Hardness Shore A 60+2.

BC8690E

A two-component urethane elastomer compound specifically designed for casting applications. Safe, easy-to-handle, room temperature mixing and curing system that contains no TDI, MDA or MOCA. BC A is insensitive to moisture during storage and normal handling; hence, this system will make dependably good void-free parts without the foaming problems that some conventional urethane systems exhibit. The low shrinkage, low viscosity, superior toughness, and excellent detail reproduction of BC Amakes this system ideal for general purpose castings and quality tooling operations. Hardness Shore A 85-90.

BC 8740E

A two-component urethane casting compound that is specifically formulated for high abrasion and impact resistance. Recommended for use for the production casting of highly ear-resistant parts and linings. Safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, MDA, or MOCA. Relatively insensitive to typical environmental moisture. Will make good void-free parts without the problems that same conventional urethane systems exhibit. Particularly suitable for mining and mineral process industries. Hardness Shore D 40+2.

BC 8760

Two-component urethane casting compound specifically formulated for high abrasion and impact resistance. Recommended uses include production casting of highly wear-resistant parts and linings. Safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, MDA or MOCA. Relatively insensitive to typical environmental moisture. Will make good void-free parts without the problems that some conventional urethane systems exhibit. The low viscosity and simple mix ratio assure uniform and easy mixing. Hardness Shore D: 60+2

BC8760E

Two component urethane casting compound specifically formulated for high abrasion and impact resistance. Recommended uses include production casting of highly wear-resistant parts and linings. Safe, easy-to-handle, room temperature mixing and curing. Does not contain TDI, MDI, MDA or MOCA. Relatively insensitive to typical environmental moisture. Will make good void-free parts without the problems that some conventional urethane systems exhibit. Hardness Shore D: 60

BC 8781

Produces a high impact rigid 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. Very high impact rigid material with exceptional clarity. 30 min. working time afford the user the option of large pours. Cures in most silicone rubber molds. Uses include: models of all kinds, artwork components, architectural models, gears, wheels, fans, etc. Hardness Shore D: 82.

BC 8782

Produces a high impact rigid 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. Working time: 12-14 min., demold time: 6-8 hours. Uses: see BC8781. When used at room temperature castings 1/8" thick or larger can be readily cast. Castings that are less than 1/8" thick generally require a mild post-cure. Hardness Shore D: 82.