BP2019 Clear-Amber Epoxy Laminating/Adhesive Resin
BP2019 is a clear-amber epoxy adhesive formulated especially for the bonding of wood and urethane model board. It may be also used as a laminating resin. The resin is color indicated (green) and will turn to a clear amber color as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, ensuring that they are thoroughly mixed, yet with no time wasted in overmixing.
Product Features:
Mix ratio (by wt.): 100:25
Viscosity (mixed): 2,100 cps
Pot life (min): 30
*Cure time (hrs) (72°F): 16
Hardness (shore): 80D
Heat Deflection (°F): 160
Color: Gray
BP9024 5-minute Epoxy Adhesive
BP 9024 is a fast-set epoxy adhesive specially formulated for the bonding of wood and urethane model board; it can also be used for making quick patches and fast laminates. The resin is color indicated (green) and will turn to a clear amber color as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, ensuring that they are thoroughly mixed, yet with no time wasted in overmixing.
BP9024, one of the first 5-Minute Epoxy Adhesives, is now available in 50ml dual-chamber cartridge packaging. Using a standard cartridge gun, the new packaging allows for fast, easy dispensing. BP9024 has been a top-selling epoxy adhesive for over 50 years; it’s used in golf club bonding and general purpose bonding of multiple substrates.
BP9024 has been used by professionals in every industry from automotive and aerospace to foundry and marine, and many more. Now with the new 50ml packaging, you can control dispensing and leave a good bead for bonding. Cases of 45 50ml cartridges are available; call 800-556-0067 for more information.
Product Features:
Mix ratio (by wt.): 100:100
Pot life (min): 5
Set time (min ) (72°F): 15
Hardness (shore): 60D
Color: Light Amber
DP1175 Foundry Plank Repair Paste
DP-11-75 is a two-component, medium-viscosity urethane patch system. A hybrid product, it was designed specifically for making quick responsive repairs/buildups to the MB4000 Foundry Plank. DP-11-75 is exceptionally tough, highly machinable after cure, and exhibits similar superior properties as the MB4000.
Product Features:
Mix ratio: 1:1
Viscosity (Mixed): 1,600 cps
Pot Life: 1.5 minutes
Cure time: 20–30 minutes
Color: Red
Packaging: 50 ml tubes
BC8880 Polyurethane Elastomer Surface Coat
BC8880 is a two-part urethane gel coat that has excellent handling characteristics, very low moisture sensitivity, a high modulus, and a high hardness. It is a brushable room-temperature curing urethane that has many general purpose applications such as foundry patterns, cure box liners, and abrasion-resistant pads and bumpers. It may also be used as a urethane adhesive.
Product Features:
Mix ratio: 100:60 by wt.
Pot life: 12–15 minutes
Viscosity (Mixed): Thixotropic
Demold time: 8–12 hours
Hardness (shore): 60D +3
Color: Available in Amber, Black and Red
BC5008-2 General Purpose Resin System
BC5008-2 is a very low viscosity, modified, unfilled, room-temperature curing, general purpose resin system that will also function as a laminating system for horizontal surfaces. A clear amber material, with a medium pot life and heat resistance to 175°F, it is considered an excellent general-purpose adhesive for in-shop use.
Product Features:
Mix ratio: 100:25 by wt.
Mix ratio: 100:26 by vol.
Pot life: 25–30 minutes
Viscosity (Mixed)@ 75°F: 500cps
Cure schedule: 8–12 hours
Color: Clear Amber
BC5009 Epoxy Adhesive and Laminating Resin
BC5009 is a very low viscosity, modified, unfilled room-temperature curing epoxy system with high-performance capabilities. Built for companies needing a 30-minute pot-life and an easily applied adhesive for bonding items like tooling/modeling boards and mid-to-large epoxy parts, as well as in other typical bonding environments, the BC5009 epoxy system will perform to your expectations. BC5009 is easy to mix, easy to apply by brush or trowel, and has excellent adhesion to most tooling materials and applications. Although this clear-amber epoxy adhesive is especially formulated for the bonding of wood and urethane model board, it may also be used as a laminating resin.
The BC50009 system has the added advantage of being a color-indicated system that visually shows the mix ratio. When mixed to the proper ratio, the green hardener and amber resin cure to light translucent amber, promoting fast and efficient mixing, with no time wasted over-mixing.
Product Features:
Mix ratio: 100:25 by wt.
Pot life: 30 minutes
Viscosity (Mixed)@ 75°F: 2,100cps
Cure schedule: 16 hours
Color: Translucent Amber
Hardness (shore D): 80
HDT (°F): 160
BC6250 Adhesive and Patch
Color and CTE matched adhesive for high temperature epoxy tooling board. BCC Products BC6250 R/H is a use temperature, color and CTE matched adhesive especially formulated for bonding and patching EB 6200 Blue High Temperature Epoxy Tooling Board.
Product Features:
Mix Ratio (Resin/Hardener): 100 to 14 by wt.
Gel Time (114 g. mass): @75°F 90 – 110 Minutes
Cure Schedule: @ 75°F 12-18 Hours
Full Cure: @ 75°F 7 Days
BC5003 Laminating System
BC5003 is a medium viscosity, unfilled, laminating system. It’s a room-temperature curing resin with a relatively short pot life. It’s considered an excellent general-purpose adhesive for in-shop use. We recommend its use in gluing up BCC’s tooling board series.
Product Features:
Mix ratio: 100:20 by wt.
Mix ratio: 100:22 by vol.
Pot life: 14–15 minutes
Viscosity (Mixed)@ 75°F: 3,500cps
Cure schedule: 6–8 hours
Color: Amber or Red
BC110 Polyurethane 5-15 Minute Superfast Adhesive
The BC150 is a two-component, fast set (5–15 minute) gel-time, room temperature cure, structural polyurethane adhesive system, excellent for automotive and marine use, as well as sign and prototypes. Designed for bonding applications that require a longer gel-time than our BC110 superfast system, BC150 allows more time for adjusting the set and placement. BC150 is a sandable adhesive system that bonds very well to a wide variety of surfaces.
•Fast-setting time, with convenient 1:1 mix ratio
•Available in 50ml and 400ml cartridges
•Without the need for primers or heat treating, bonds well to surfaces such as aluminum, stainless steel, ABS, PVC, polyurethane, composites, thermoplastics, thermosetting plastics, wood, glass, and concrete
Product Features:
Color: Gray
Viscosity @ 250C: 30,000
Weight per Gallon: 11
Mix Ratio by Volume: 100:100
Mix Ratio by Weight: 100:100
Working Time: 5–15 Minutes
Fixture Time: 20 Minutes
Functional Cure: 2 Hours
Full Cure: 24 hours
Service Temperature: -400°F to 250°F
Coverage per lb.: 94 sq. inch per lb @ ¼”
BC100 Cyanoacrylate Adhesives -- Thin
BC100 Thin is a low-viscosity material ideal for bonding larger areas. It has a 20-second fixture cure and is able to fill gaps of .002″ wide. BC100 Thin is perfectly designed for bonding plastic parts and other substrates like stainless steel, neoprene and ABS (acrylonitrile butadiene styrene), and even nitrile rubber.
Product Features:
Gap Filling: 0.05mm
Bonding Time: 20 seconds
Glass Transition (°F): 248
Tensile Shear Strength: 15–26 n/mm²
BC110 Polyurethane 1-2 Minute Superfast Adhesive
The BC110 is a two-component, 1–2 minute very fast-setting, room-temperature cure, polyurethane adhesive system for applications that require super-fast setting adhesive and great strength. Developed for quick repairs to automotive trims, dash panels and holding fixtures, it is also used in sport footwear bonding of soles and quick design bonds. BC110 is a sandable adhesive system that bonds very well to a wide variety of surfaces.
•Fast-setting time, with convenient 1:1 mix ratio
•Available in 50ml and 400ml cartridges
•Without the need for primers or heat treating, bonds well to surfaces such as aluminum, stainless steel, ABS, PVC, polyurethane, composites, thermoplastics, thermosetting plastics, wood, glass, and concrete
Product Features:
Color: Black
Viscosity @ 250C: 30,000
Weight per Gallon: 11
Mix Ratio by Volume: 100:100
Mix Ratio by Weight: 100:100
Working Time: 60–100 seconds
Fixture Time: 10–14 Minutes
Functional Cure: 2 hours
Full Cure: 24 hours
Service Temperature: -400°F to 250°F
Coverage per lb: 94 sq. inch per lb @ 1/4″
BC100 Cyanoacrylate Adhesives -- Medium
BC100 Medium, like its name indicates, is the medium-viscosity version of cyanoacrylate adhesive that has become the most popular in super-bonding applications. A 12-second fixture bond makes the BC100 the fastest in our family of cyanoacrylates. Excellent for bonding rough and porous surfaces, BC100 meets military specifications (MLLA 46050 Type II Class II). It’s perfect for industrial manufacturing and repair applications, because it allow you to bond with speed.
Product Features:
Gap Filling: 0.2mm
Bonding Time: 12 seconds
Glass Transition (°F): 251
Tensile Shear Strength: 18–26 n/mm²
BC100 Cyanoacrylate Adhesives -- Medium
BC100 Thick is the slow and thickest member of our line of cyanoacrylate adhesives. Excellent for filling gaps, the BC100 Thick has a 30-second fixture time for the material to fill voids and bonding areas. Although formulated especially to bond with plastics, metals, and elastomers, it bonds well to a variety of substrates and materials. It’s perfect for bonding rough and irregular surfaces and for applications requiring up to 15 seconds of alignment and work time.
Product Features:
Gap Filling: 0.45mm
Bonding Time: 30 seconds
Glass Transition (°F): 257
Tensile Shear Strength: 15–22 n/mm²
adhesives
BC100 Cyanoacrylate Adhesives -- Ancillaries
The BC100 family of cyanoacrylates offers fast cure speeds formulated to bond those hard-to-bond surfaces with dependable strength. The BC100 adhesive comes in three formulas: BC100 Thin, BC100 Medium, and BC100 Thick. All three formulas perform to the exacting standards for which all BCC Products are known. All our cyanoacrylate adhesives currently come in 1oz and 2oz bottles, with other sizes available upon request. The BC100 cyanoacrylate adhesive family also has a De-Bonding agent which will remove the bonds of all three versions of our adhesive (thin, medium, and thick). The BC100 family also has an Accelerator for quickening the bond when sprayed.
BP6118 Polysulfide Adhesive
BP6118 is a two-component polysulfide adhesive formulated especially for the bonding of Blehm Cold Setting Rubber (CSR) to plaster casings. It may also be used for the bonding of CSR to other backing materials, such as metal or wood.
Product Features:
Mix ratio (by wt.): 100:10
Viscosity (mixed): 6,500cps
Pot life (min): 5
Set time (min) (72°F): 30
Color: Black
BP8002 Styrofoam Pattern Adhesive
BP8002 is a water-based latex-rubber styrofoam pattern adhesive used for the rapid build-up of styrofoam foundry patterns. Containing a green dye for easier visibility, BP8002 has been specially formulated and fully approved for the “Full Mold Foundry Process” of direct metal casting using styrofoam patterns.
Product Features:
Viscosity: Brushable thixotropic
Weight (per gal.): 7.6 lbs
Base: Liquid latex dispersed in water
Color: Green
DP1183 Urethane Adhesive Slo
DP-11-83 is a low-viscosity, quick-setting, easy-to-use adhesive and/or casting material. This product was designed to bond together our MB1200 foam board to create desired dimensions in length, width, and height. DP-11-83 has a working life of up to 13 minutes for casting applications; if used as an adhesive, it is workable for up to 16 minutes.
Product Features:
Mix ratio: 1:1
Viscosity (Mixed): 2,200 cps
Pot Life: 14–16 minutes
Cure time: 6–8 hours
Color: Pink
DP1188 Urethane Adhesive
DP-11-88 is a medium-viscosity, quick-setting, easy-to-use urethane adhesive. This system was specifically designed to bond together the MB2001 Model/Tooling Board to create desired dimensions in length, width, and height. DP-11-88 offers a working life of 10–12 minutes in 1/4 pound mass, and 20 + minutes in a 1/16 inch film.
Product Features:
Mix ratio: 1:1
Viscosity (Mixed): 3,750 cps
Hardness: 62D
Working time: 10–12 minutes
Gel time: 12–14 minutes
BC8890 Urethane Elastomer Surface Coat
BC8890 is a two-part urethane gel coat that has excellent handling characteristics, very low moisture sensitivity, a high modulus, and a high hardness. It is a brushable room-temperature curing urethane that has many general purpose applications such as foundry patterns, cure box liners, and abrasion-resistant pads and bumpers. It may also be used as a urethane adhesive.
Product Features:
Mix ratio: 100:60 by wt.
Pot life: 13 minutes
Viscosity (Mixed): Thixotropic
Demold time: 2–3 hours
Hardness (shore): 70D +2
Color: Available in Amber, Black, and Red
BP8003 Styrofoam Pattern Adhesive
BP8003 is a water-based latex-rubber styrofoam pattern adhesive used for the rapid build-up of styrofoam foundry patterns. Made of a natural cream color to blend with the styrofoam, BP8002 has been specially formulated and fully approved for the “Full Mold Foundry Process” of direct metal casting using styrofoam patterns.
Product Features:
Viscosity: Brushable thixotropic
Weight (per gal.): 7.6 lbs
Base: Latex rubber dispersed in water
Color: Cream